Pond Valves,Bottom Drains,Tank Connectors

Bottom drains are designed to be placed at the deepest part of the pond for the removal of waste and settlements from the Koi. We have a wide range of tank connectors suitable for use with pond liners or concrete ponds.

Showing all 10 results

  • Pond Plumbing Fittings Hosetail End Stepped Solvent Weld

    Pond Plumbing Fittings Hosetail End Stepped Solvent Weld

    £3.00

    Multi Stage Hosetail Adaptor.
    Fits 1½”, 1¼”, 1″, ¾”, ½” hose.

    Read more
  • Threaded Tank Connector 40mm Diameter (1.5 inch)

    Threaded Tank Connector 40mm Diameter (1.5 inch)

    £3.44

    This unique 40mm (1.5 inch) threaded tank connectors unlike any other fitting on the market, they will accept the same size solvent weld pipe both sides of the fitting. We recommended using silicone sealant to make a water tight connection between tank and fitting.

    Read more
  • Pond Fittings Accessories Demountable Union 43mm Diameter

    Pond Fittings Accessories Demountable Union 43mm Diameter

    £3.95

    Takes all 43mm (1.5 inch) solvent weld pipe and 43mm hose tails. For any application where the removal of an item (UV, Pump, Filter supply etc.) may be required. To remove simply unscrew the centre section.

    Read more
  • Tank Connector Threaded (2 inch)

    Tank Connector Threaded (2 inch)

    £4.94

    This unique 50mm (2 inch) threaded tank connectors unlike any other fitting on the market, they will accept the same size solvent weld pipe both sides of the fitting. We recommended using silicone sealant to make a water tight connection between tank and fitting.

    Read more
  • Flanged Tank and Liner Connector 50mm Diameter (2 inch)

    Flanged Tank Connector (1.5 inch – 4 inch)

    £4.94£6.95

    Flanged tank connector suitable for our pond liners, water tanks, filter systems. Solvent weld pipework. Large flange, give larger surface to seal against liners. Stainless steel screws. Used widely as inlets and outlets to filter systems, returns into the pond and drains. The solvent weld flange tank/liner connector is a multi use pond fitting. The flange on this tank connector allows them to be easily sealed against pond liners with the use of silicone.

    Select options
  • Pond Fittings Hose Tail Multifunctional 50mm (2 inch)

    Pond Fittings Hose Tail Multifunctional 50mm (2 inch)

    £5.28

    This specially designed 2″ hose tail fits 1.5″ male BSP Thread (Internally) / 2″ Solvent Weld Sockets (Externally) (Treaded End) and 2″ (50mm) Flexible pipe (Externally) / 43 mm Solvent Weld (Internally) (Hose Tail End).

    Read more
  • Ball Valve 50mm Diameter (1.5 inch Internal diameter)

    Ball Valve for pond pipework (3 sizes, 1.5 inch internal diameter – 4 inch)

    £10.74£43.20

    Ball valve ABS. These high quality ball valves are manufactured in black ABS, designed to fit 1.5 inch, 2 inch and 4 inch solvent weld pipe internally. It has a high visibility yellow handle that enables a open/closed position.

    Sizes are the internal diameter.

    Select options
  • Tommy Drain/Bottom Drain For Koi Pond (1.5 inch - 4 inch)

    Tommy Drain/Bottom Drain For Koi Pond (1.5 inch – 4 inch)

    £10.81£13.94

    Suitable for outlets from the side or bottom of your pond or filter.

    Select options
  • Slide Valve 3 inch Diameter (83mm)

    Valterra Pond Slide Valve (1 inch – 4 inch)

    £16.34£59.99

    Slide valve designed to fit 1.5, 2, 3 and 4 inch solvent weld pipe. These valves are ideal for pond construction and for quick shut-off in low pressure lines. Knife gate valves are economical, fast control valves for clean and dirty water low pressure applications. They have become very popular in the aquaculture industry due to easy application.

    Select options
  • X Large Sump Bottom Drain 110mm Diameter (4 inch)

    Yamitsu Sump Bottom Drain 110mm Diameter (4 inch)

    £26.40

    Large Sump Bottom Drain For installation at lowest point of pond. A must for gravity fed systems. Ideally suited for draining heaver particles to waste or filter system. Can be reduced down to 3″ if required. 4″ (110 mm) exhaust. We recommended using silicone sealant to make a water tight connection between tank and fitting.

    Read more